IOS – Router Switch Blog

HUAWEI P50 Pro Camera is Extraordinary, the Realism Surpasses iPhone 13

Posted on October 27, 2021 by Misha | 0 Comments

In addition to performance and entertainment requirements, the daily use of mobile phones to take pictures and photography has also become a rigid demand for everyone. After all, most users are not as professional as photographers. A mobile phone that…

iPhone 13 PK HUAWEI P50, Which One Do You Like?

Posted on October 13, 2021 by Misha | 0 Comments

Both the iPhone 13 and HUAWEI P50 are one of the most popular mobile phones, and they are both good choices in terms of mobile phone appearance and mobile network performance experience. Although HUAWEI has been suppressed by external forces this year,…

After a Month Of Release, Harmony Officially Announced Cooperation With Emirates

Posted on July 21, 2021 by Misha | 0 Comments

As consumers’ requirements for mobile phones become more and more demanding, major manufacturers are trying their best to please consumers, but most of them start with hardware, such as better processors, better cameras or better Screen. But in fact, it…

Cisco IOS XE Version and IOS Version

Posted on August 28, 2014 by RouterSwitch Tech | 0 Comments

How much do you know about Cisco software for its hardware? There are main four types of Cisco software: IOS, XE, XR, and NX-OS. In this article, we will map the main IOS and IOS XE; you can check…

Top 10 Cisco IOS Configuration Mistakes

Posted on August 21, 2013 by RouterSwitch Tech | 0 Comments

There are a number of common mistakes that are made while learning something about Cisco IOS. In this article it covers the largest of these misconfigurations. This list is of course subjective, but it should provide a good reference for…

Basic HSRP Configuration Example On Cisco IOS XR

Posted on August 2, 2013 by RouterSwitch Tech | 0 Comments

The Hot Standby Router Protocol (HSRP) is an IP routing redundancy protocol designed to allow for transparent failover at the first-hop IP router. HSRP provides high network availability, because it routes IP traffic from hosts on networks without relying on…

How to Configure NAT in Cisco IOS?

Posted on January 8, 2013 by RouterSwitch Tech | 0 Comments

NAT (Network Address Translation), it in simple terms translates an IP address into another. Network Address Translation is of different types like Static NAT (One to One) Dynamic NAT (Many to Many) Overloading (Many to One) The main purpose of…

Cisco Catalyst 2960 Series Enables Routing

Posted on September 5, 2012 by RouterSwitch Tech | 0 Comments

“Hi all, I have a 2960G 48 port switch here, I want to enable routing on this switch, but I can’t find how. I know this is normally is only a layer 2 switch, however since one of the latest…

OSPF, How to Configure OSPF in the Cisco IOS?

Posted on July 19, 2012 by RouterSwitch Tech | 0 Comments

OSPF is an interior gateway protocol that routes Internet Protocol (IP) packets solely within a single routing domain (autonomous system). It gathers link state information from available routers and constructs a topology map of the network. The topology determines the…

Cisco CTO: Software is becoming a Core Competency for Us

Posted on February 7, 2012 by RouterSwitch Tech | 0 Comments

Padmasree Warrior—Cisco’s chief technology officer talks up vendor’s software, server and switching skills in opening speech at Cisco Live event. Cisco’s chief technology officer has claimed that software will soon be seen as one of the vendor’s “core competencies”, with…

CISCO, Why We Need IPv6 Now?

Posted on July 29, 2011 by RouterSwitch Tech | 13 Comments

Which of the following is a reason why IPv6 has been developed? a. IPv4 addresses are not secure. / b. IPv4 addresses are running out. / c. Dynamic address allocation is desired. / d. Mobile IP networking is needed. What…