Following are common product highlights of the 1 rack unit (RU) IE 4010 Series Switches:
- Two product IDs:
Downlink: 12 GE fiber and 12 GE copper, 4 GE SFP uplink
Downlink: 24 GE PoE capable, 4 GE SFP uplink
- One PSU allows 65W Power over Ethernet (PoE)/PoE+, Two power supply units (PSUs) combined allow 185W for PoE/PoE+.
- PoE: up to 12 PoE/6 PoE+ ports in FCS, capable to support up to 24 Poe/12 PoE+ with larger power supply in the roadmap
- High-performance Layer2/3 aggregation switch
- External SD card is shipped with chassis
- Alarm contacts: Four-alarm input, one-alarm output
- 1588v2 Precision Time Protocol (PTP) utility power profile (c37.238) for utility applications.
- Modbus TCP/IP, Generic Object Oriented Substation Events (GOOSE) prioritization, supervisory control and data acquisition (SCADA) protocol classification, Bidirectional Forwarding Detection (BFD), Onboard Failure Logging (OBFL)
- PRP is supported in the 4 downlink GE ports (port g1/17-20)
- Dying-gasp support for loss-of-power notification
- Profinet support Version 2 (certification) and Common Industrial Protocol (CIP) Ethernet/IP
- Field upgradeable to IP services Layer 3 License (right-to-use [RTU] license)
- High-voltage power supply 85-265VAC, 88-300VDC, up to 150W/PSU
- Low-voltage power supply 18-75 VDC, up to 150W/PSU
- Supports Cisco Redundant Ethernet Protocol (REP), PRP
- IP 30 rating
Product Operating temperature range
- -40C to +70C (Vented Enclosure – 40 LFM Air Flow)
- -40C to +60C (Sealed Enclosure – 0 LFM Air Flow)
- -34C to +75C (Fan or Blower equipped Enclosure – 200 LFM Air Flow)
Product Mechanical Dimension
- .75 x 17.5 x 14.0 in. (4.45 x 44.5 x 35.6 cm), 1RU (rack unit) height
The Figure below provides an overview of the various ports and connectors available on IE 4010 and Table1 lists the available IE4010 product PIDs
Figure. Cisco IE 4010 Series Switches Overview
Table1. Cisco IE 4010 Series Models
| Product Number
|
Total Ports
|
Uplinks
|
SFP Fiber Ports (S)
|
Copper 10/100/1000 PoE/PoE+ Ports
|
Default Software
|
| IE-4010-16S12P
|
28
|
4 SFP (1G)
|
12 (100/1000M)
|
12 (10/100/1000M)
|
LAN Base1
|
| IE-4010-4S24P
|
28
|
4 SFP (1G)
|
24 (10/100/1000M)
|
LAN Base1
|
Table2. Cisco IE4010 Power Supply and Accessory
| PWR-RGD-AC-DC-H
|
Hazloc grade power supply high voltage (88-300VDC/85-264VAC), 150W
|
| PWR-RGD-AC-DC-H=
|
Hazloc grade power supply high voltage (88-300VDC/85-264VAC), 150W
|
| PWR-RGD-LOW-DC-H
|
Hazloc grade power supply low voltage (24/48VDC), 150W
|
| PWR-RGD-LOW-DC-H=
|
Hazloc grade power supply low voltage (24/48VDC), 150W
|
| SD-IE-1GB=
|
Spare SD card
|
Following are considerations to Cisco IE 4010 Series Switches:
- High PoE or PoE+ port density usage up 12 PoE/6 Poe+ (FCS)
- Aggregate-edge routing table requires large IP routing table (8000 IP routes)
- SD card is shipped with unit as flash memory (optional)
- Utility network environment
More Related:
Cisco IE 4000 Switch Hardware Installation Guide
Simple Cisco Industrial Ethernet Switches (IE 4000, IE 2000 included) Selection Guides
Cisco Industrial Ethernet Switches Ordering Guide
Cisco Industrial Ethernet 4010 Series Switches Data Sheet
Cisco Industrial Ethernet 4000 Series Switches Data Sheet
Cisco Industrial Ethernet 5000 Series Switches-Ordering Guide
